A 2 piece ball valve uses two main body sections to hold the ball and sealing parts in position. Turning the handle rotates the ball, aligning its bore with the pipe for flow or across the passage for shut-off. Two-piece designs are available in different port styles and connection arrangements. Some models have a reduced port, while others use a full-port passage; the distinction affects the open flow area and should be considered during pipe sizing. Body, stem and seat materials also vary across the range. Before ordering, compare the model drawing with the pipe standard and review the working medium, temperature and pressure.
Product Parameters
|
Product family |
Two-piece ball valve |
|
Catalogue model examples |
SC201 / SC202 series, where applicable |
|
Body material |
CF8 or CF8M on specified models |
|
Stem material |
304 or 316 on specified models |
|
Seat material |
RPTFE or other listed model configuration |
|
Port design |
Full-port or reduced-port, according to model |
|
Nominal size / pressure |
Refer to the selected series table and drawing |
|
Inspection references |
API 598 and EN 12266 are listed in the catalogue |
Product Advantages
• The 2 piece ball valve has a body arrangement familiar to installers and maintenance staff.
• The quarter-turn handle makes manual operation easy to understand during line checks.
• Port and connection options help match pipe dimensions and flow requirements.
Main Applications
• A 2 piece ball valve can be installed in general plant pipework for manual isolation of compatible fluids.
• It is used on equipment connections where the specified end type matches the existing line.
• For systems sensitive to flow restriction, confirm whether the selected valve is full-port or reduced-port and check the required flow capacity.


FAQ
Q: What is the difference between full-port and reduced-port?
A: A full-port valve has a larger flow passage relative to the line size; a reduced-port model has a smaller passage. Confirm the drawing and flow requirement.
Q: How is it different from a three-piece valve?
A: The main difference is the body construction and the maintenance access it provides. Service procedures depend on the specific design.
Q: Can the end connection be customized?
A: Share the required pipe standard and dimensions first. Availability of a custom connection must be confirmed for the selected series.
Hot Tags: 2 piece ball valve, China 2 piece ball valve manufacturers, suppliers, 300 flanged ball valve, ball valve fittings, ball valve low pressure, Ball Valve With Flange Connection, flange solenoid valve, threaded ball valve

